SRAM Rival® HRD Shift-Brake Control
Awarded top honors by Germany’s “RoadBike” magazine, SRAM’s HydroR system provides unconditional braking.
Connectamajig™ is the coupling hose that makes initial set-up of hydraulic systems easy, fast and convenient. The intimidation of hydraulics is gone with a push and a twist; it’s just that easy. Connectamajig allows for several disconnects and reconnects before a system bleed is required.
Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. We found that in our systems DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions.
DoubleTap® makes changing gears easier and faster, eliminating the cumbersome and awkward engagement associated with two-lever systems. DoubleTap handles up- and downshifts in one short, sweeping motion, with minimal effort and maximum comfort no matter where you are on the bars.
DoubleTap® uses two pawls, one for holding the ratchet wheel, and one for transporting it up and down through the gear change. The pawls are arranged in a way so that they can leapfrog each other depending on how far, and with how much pressure, you push the shift lever.
With short, rapid taps the transport pawl (04) moves the ratchet wheel (02) up through the shifting range. Downshifting comes via a longer sweep of the lever (in the same inward direction you upshift, but to an ergonomically maximized 15° angle) with the holding pawl (03) and the transport pawl leapfrogging each other quickly and smoothly.
Location, Location, Location: DoubleTap’s one-motion unidirectional levers (05) work flawlessly no matter what position you’re shifting from. Its double-articulated design (01), which is completely separate from the brake pivot, is easily engaged from the hoods or the drops.
Unlike all other forward controls, DoubleTap® also lets you pull the shift lever in against the bars so you can upshift while sprinting or attacking without giving up a firm grip. On DoubleTap® controls, the brake and shift levers are completely independent, each operating with their own pivot points. This not only allows for the multiposition functionality, it also eliminates the risk of engaging brakes or shifters unintentionally—an unfortunate side effect of other shift/brake lever designs.
Longer brake levers, independent reach adjust for the brake and shift levers, and optimized hood shape give riders of any size comfort and easy access to the controls.
When we launched our road technology from scratch we reapplied our MTB proven SRAM 1:1 actuation ratio (shifter cable travel : derailleur movement) for 10 speed rear shifting. EA helps to simplify/stabilize the uneasy act of balancing rear derailleur hanger design, tight cog spacing and exact cable tension. The result: the easiest index shifting system to set up and it stays that way.
Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone.
The front derailleur cage rotates to maintain a consistent angular relationship with the chain. Yaw technology eliminates the need for shifter trim. As a result, shifts feel more direct, more precise, and combined with the new Red crankset and chainrings, delivers an unmatched performance advantage in front shifting.
ZeroLoss simply means, well, zero loss—when you push on the lever, for an upshift or down shift, the cable is engaged instantly—zero loss of movement. There is no middle-ground where you're waiting for the shift to come. Gear changes are instant and precise.
|speeds||11 Rear/ 2 Front|
|compatibility||SRAM RED® 22, Force 22 & Rival 22 Yaw™ Front Derailleurs/ Exact Actuation Rear Derailleurs/ SRAM RED® 22, Force 22 & Rival 22 HRR & HRD|
|recommended group||SRAM Rival 22|
|technology highlight(s)||Yaw™/ DoubleTap™/ ZeroLoss™ on Front & Rear/ ErgoDynamics™ Fit/ Independent E-Z Access Shift-Brake Lever Reach Adjust / HydroR/ Connectamajig®|
|finish||Textured hood covers, Grey & black anodized finish|
|material||Aluminum brake levers/ aluminum shift levers, Forged aluminum disc caliper/ stainless hardware|
|other||Steel-backed organic pads, Use DOT 5.1|
|weight||(Post mount) 493g (left lever, front caliper, 800mm hose, DIR, 160mm rotor and hardware)|
|Speeds||11 Rear/ 2 Front|
|Compatibility||SRAM RED® 22, Force 22 & Rival 22 Yaw™ Front Derailleurs/ Exact Actuation Rear Derailleurs/ SRAM RED® 22, Force 22 & Rival 22 HRR & HRD|
|RECOMMENDED GROUP||SRAM Rival 22|
|TECHNOLOGY HIGHLIGHT(S)||Yaw™/ DoubleTap™/ ZeroLoss™ on Front & Rear/ ErgoDynamics™ Fit/ Independent E-Z Access Shift-Brake Lever Reach Adjust / HydroR/ Connectamajig®|
|Finish||Textured hood covers, Grey & black anodized finish|
|Material||Aluminum brake levers/ aluminum shift levers, Forged aluminum disc caliper/ stainless hardware|
|Other||Steel-backed organic pads, Use DOT 5.1|
|Weight||(Post mount) 493g (left lever, front caliper, 800mm hose, DIR, 160mm rotor and hardware)|
On all orders over $99 Evo Cycles offers free delivery to any physical address in New Zealand - this INCLUDES large and bulky items and bikes!
On orders under $99 we charge $5 flat-rate freight. This is so we can give our customers (that's you!) the most competitive pricing available for small parts and accessories. There are no hidden shipping costs and you know exactly what you're paying for.
Order and pay online and collect everything from one of our stores for free - no handling charges whatsoever! Just select which store you would like to collect from at checkout. Find out more about Click&Collect here.
Simply select click and collect when you're checking out then choose which store you would like to pick your order up from.
We'll send your items from our logistics centre to the store of your choosing.
We'll notify you once your items have arrived at your chosen store and are ready for pick-up.
At a time that's convenient for you. Easy.