This bike was designed with input from cyclocross royalty, including World Champion Sven Nys and US National Champ Katie Compton.
Carbon rules on the cross course – it's lighter, more forgiving and more efficient than aluminium.
The combination of Front and Rear IsoSpeed cuts down on the fatiguing impacts of rough courses and increases compliance, giving you more traction when it matters.
Boone's cross-specific geometry and tube shapes make shouldering easy, so you can dominate all aspects of a race, including run-ups.****NOTE: This bike is available for purchase online, but must be picked up from an approved store.
|weight||56cm - 1.84kg / 4.05lbs|
|frame||600 Series OCLV Carbon, front and rear IsoSpeed, tapered head tube, BB90, flat mount disc brakes, 12mm thru axle, internal cable routing, 3S chain keeper, ride-tuned seatmast|
|fork||Trek IsoSpeed Cross full carbon disc, tapered steerer, flat mount disc brakes, 12mm thru axle|
|headset||Integrated, cartridge bearing, sealed, 1-1/8" top, 1.5" bottom|
*All specifications listed are subject to change without notice.
|Weight||56cm - 1.84kg / 4.05lbs|
|FRAME||600 Series OCLV Carbon, front and rear IsoSpeed, tapered head tube, BB90, flat mount disc brakes, 12mm thru axle, internal cable routing, 3S chain keeper, ride-tuned seatmast|
|Fork||Trek IsoSpeed Cross full carbon disc, tapered steerer, flat mount disc brakes, 12mm thru axle|
|Headset||Integrated, cartridge bearing, sealed, 1-1/8" top, 1.5" bottom|
On all orders over $99
Order and pay online and collect everything from one of our stores for free - no handling charges whatsoever! Just select which store you would like to collect from at checkout. Find out more about Click&Collect here.
You purchase your bike from evocycles.co.nz
Our expert mechanic pulls your bike out of the box and builds it to 100%, excluding accessories (i.e racks and baskets). We tune the brakes and gears then test ride to ensure everything runs smoothly.
We then take off a few simple parts to fit the bike into the box. We double check to ensure all the parts are enclosed, before sealing the box and sending to you.
Your bike arrives!
You use 2-3 common tools to fit a few simple parts. If you get stuck, use our help centre and bike assembly guides or give us a call and we'll talk you through the process.