Stages Shimano Ultegra R8100 Dual-Sided Power Meter

Out of Stock

DESCRIPTION

DESCRIPTION+

TOUR-PROVEN POWER. PREMIUM CRANKS.

The new Gen 3 Stages Power meter is built on to a Shimano Ultegra R8100 crankset. The Stages Power meter is placed on both the drive and non-drive side of the crank in order to independently measure a rider's left and right legs.

+/- 1.5 % accuracy in all conditions
Active temperature compensation
Accelerometer based cadence measurement
Wirelessly upgradable firmware
LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset
Updated accelorometer and addition of gyroscope for improved cadence resolution
Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength
Lifetime access to Stages Link for power meter management and firmware upgrade
2 months free access to Stages Link premium training and coaching features

Compatibility

This new Shimano R8100 Stages Power LR power meter is only compatible with Shimano Hollowtech II, 12-speed, HG+ road drivetrains.

Frame Compatibility: Most frames, see fit guide in our Support section
Device Compatibility: ANT+, Bluetooth Smart Ready
Software Compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center and others

Tour Proven - Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter.

Active Temperature Compensation as standard equipment - Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions.

Individual meter calibration for the most accurate results - Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the bi-lateral data produced by our system, as it's a real measurement and not an estimation.

SPECIFICATIONS

accuracy	± 1.5%
power meter housing	low profile design, with robust door interface
power range (watts)	0 to 5000
cadence range (rpm)	10-220
water resistance rating	IPX7
weight	Only adds 35g to base crank arm
crank arm lengths	165mm, 167.5mm 170mm, 172.5mm, 175mm
battery life	175+ hours (via 2 coin cell CR2032)
in the box	Non-drive-side power meter, Drive-side power meter, Shimano chainrings, 2x high quality CR2032 coin cell battery, Product Identification Card with Serial Number and ANT+ I.D. Number, User Guide

SPECIFICATIONS+

SPECIFICATIONS

Accuracy	± 1.5%
Power meter housing	low profile design, with robust door interface
Power range (Watts)	0 to 5000
Cadence range (rpm)	10-220
Water Resistance Rating	IPX7
Weight	Only adds 35g to base crank arm
Crank arm lengths	165mm, 167.5mm 170mm, 172.5mm, 175mm
Battery life	175+ hours (via 2 coin cell CR2032)
In the Box	Non-drive-side power meter, Drive-side power meter, Shimano chainrings, 2x high quality CR2032 coin cell battery, Product Identification Card with Serial Number and ANT+ I.D. Number, User Guide